DC POWER SUPPLIES ON SALE!
If you don't see what you're looking for please ask
or - Call 800-582-8378
Impedance Measurement (R,L,C,Q,D) > RLC Bridges / Meters > SR715 LCR Meter by Stanford Research Sys
SR715 LCR Meter
Product Description & Specs
The SR715 LCR Meter measure passive components with as little as 0.05% error. These easy-to-use instruments are quick to setup, adjust and calibrate. The SR715 is ideal for applications such as incoming inspection, quality control, automated test, and general benchtop use.
A 5-digit LED display shows measured values, entered parameters, instrument status, and user messages. When making measurements, the major parameter (L, C or R) is shown on the left display and the appropriate minor parameter (Q, D or R) is shown on the right display.
Measurements can be performed at test frequencies of 100 Hz, 120 Hz, 1 kHz, and 10 kHz. A built-in drive voltage can be set to preset values (0.1, 0.25 and 1.0 V) or adjusted from 0.1 to 1.0 V in 50 mV increments. Measurements are taken at rates of 2, 10 or 20 samples per second. Consecutive readings can be averaged between 2 and 10 times for increased accuracy. Both series or parallel equivalent circuit models of a component are supported. Capacitor measurements use either the internal 2.0 VDC bias or an external DC source of up to 40 volts.
0.2 % accuracy
5-digit display of L, C, R and Q or D
Test frequencies to 10kHz
Up to 20 measurements per second
Binning and limits for parts sorting
External capacitor bias up to 40 V
RS-232 computer interface
GPIB and Parts handler interfaces (opt.)
E-mail or call us at 800-582-8378 for more information.