Contact Us
Product Categories:
About Kandel Electronics
Visa | Master Card | Amex

SALE #1 — March 16-20
SALE #2 — March 21-26

Kandel Electronics is preparing for retirement
after serving our industry for 25 YEARS.
We are grateful for your support!

Click Here for Auction Preview!
Product Search:  

Impedance Measurement (R,L,C,Q,D) > RLC Bridges / Meters > 4291A 001-1C2-1D5 Impedance / Material Analyzer by Hewlett Packard - Agilent- Keysight

4291A 001-1C2-1D5 Impedance / Material Analyzer

 Request a Quote

Product Description & Specs

The Agilent 4291A RF impedance/material analyzer provides a total solution for high-accuracy and easy measurement of surface-mount components and dielectric/magnetic materials. The Agilent 4291A uses a direct current-voltage measurement technique, opposing the reflection measurement technique, for more accurate impedance measurement over wide impedance range.
Basic impedance accuracy is +/- 0.8%. High Q accuracy enables low-loss component analysis. An internal synthesizer sweeps frequency from 1 MHz to 1.8 GHz with 1 mHz resolution. A 1.8-m error-less cable connects the analyzer to a test station so you can extend your test point away from the analyzer without losing accuracy. Advanced calibration and error compensation function eliminate measurement error factors in fixtures and assure high accuracy and repeatability at DUT/MUT.
The Agilent 4291A also provides automatic level control and monitor of test signals by using IBASIC programming function; devices can be measured under a constant voltage or current. Measure bias dependent impedance characteristics with optional dc bias (up to 40 V and 100 mA). At the push of a button, the built-in Equivalent Circuit Analysis Function automatically calculates the circuit constant values of five circuit models.
The Agilent 4291A has two measurement channels; each channel can be set to measure a single (e.g. Z) or dual (e.g. Z-theta) impedance parameter. The color TFT with split-display can show both active traces and memory traces (stored in RAM). A built-in floppy disk drive stores programs and test data in either LIF or MS-DOS format. With built-in IBASIC, you can control external test equipment such as a temperature chamber or wafer prober directly from the Agilent 4291A. You do not need a separate instrument controller.
Material Evaluation
The Agilent 4291A enables easy and sophisticated material evaluation and improves material evaluation quality and efficiency. The Agilent 4291A provides the total dielectric/magnetic material measurement solutions in wide frequency range (1 MHz to 1 GHz).

Four component test fixtures (DUT size: 0.5 mm to 20 mm)
Independent parameter selection in 2 channels
Direct read-out permittivity, permeability (option)
Two material fixtures (operating temperature: -55deg C to +200deg C)
Versatile analysis (temperature, cole-cole plot, relaxation time)
Sweep parameters (frequency, ac level, dc bias, temperature

4291A 001 1C2 1D5

E-mail or call us at 800-582-8378 for more information.

Home   About   Contact   Category   Manufacturer   Search   Equipment Rentals   Weekly Specials

Copyright © 1998-2014, Kandel Electronics, Inc.