Contact Us
Product Categories:
About Kandel Electronics
Visa | Master Card | Amex

SALE #1 — March 16-20
SALE #2 — March 21-26

Kandel Electronics is preparing for retirement
after serving our industry for 25 YEARS.
We are grateful for your support!

Click Here for Auction Preview!
Product Search:  

Amplifiers > RF Solid State Amplifiers > 10W1000C RF Amplifier 500KHz - 1GHz 10 Watts 40dB Gain GPIB by Amplifier Research

10W1000C RF Amplifier 500KHz - 1GHz 10 Watts 40dB Gain GPIB

 Request a Quote

Product Description & Specs

The Model 10W1000C is a portable, self-contained, air-cooled, broadband, solid state amplifier designed for applications where instantaneous bandwidth and high gain are required. Push-pull circuitry is utilized in the high power stages to lower distortion and improve stability. The 10W1000C, when used with an RF sweep generator, will provide a minimum of 10 watts of swept power. Included is a front panel gain control which permits the operator to conveniently set the desired output level. The 10W1000C is protected from RF input overdrive by limiting diodes and an RF input leveling circuit which controls the RF input level to the RF amplifier first stage when the RF input level is increased above 0 dBm. The RF Amplifier stages are protected from over temperature by removing the DC voltage to them if an over temperature condition occurs due to cooling blockage or fan failure. There is a digital display on the front panel to indicate the operate status and fault conditions when an over temperature, power supply, or amplifier fault has occurred. The unit can be returned to operate when the condition has been cleared. The 10W1000C includes digital control for both local and remote control of the amplifier. This 8-bit RISC microprocessor controlled board provides both IEEE-488 (GPIB) and asynchronous, full duplex RS-232 control of all amplifier functions.
Frequency Response: 500 kHz-1000 MHz instantaneously
Gain (at maximum setting): 40 dB minimum
Gain Adjustment (Continuous Range): 20 dB minimum (4096 steps remote)
Rated Power Output: 10 watts minimum
Input For Rated Output: 1.0 milliwatt maximum
Power Output @ 3db Compression: Nominal: 20 watts Minimum: 10 watts
Power Output @ 1dB Compression
Nominal: 17 watts
Minimum: 10 watts
Flatness: ?1.0 dB typical; ?1.5 dB maximum
Remote Control: IEEE-488: 24 pin female; RS-232: 9 pin Subminiature D (female)

E-mail or call us at 800-582-8378 for more information.

Home   About   Contact   Category   Manufacturer   Search   Equipment Rentals   Weekly Specials

Copyright © 1998-2014, Kandel Electronics, Inc.