SALE #1 — March 16-20
SALE #2 — March 21-26
Kandel Electronics is preparing for retirement
after serving our industry for 25 YEARS.
We are grateful for your support!
for More Information!
Amplifiers > RF Solid State Amplifiers > LN1000M2 Low Noise Preamplifier 10KHz-1000MHz 11dBm 30dB Ga by Amplifier Research
LN1000M2 Low Noise Preamplifier 10KHz-1000MHz 11dBm 30dB Ga
Product Description & Specs
The Model LN1000M2 is a broadband, linear pre-amplifier for laboratory applications requiring instantaneous bandwidth and low noise.
It is useful for amplifying low level signals to more useful levels for driving power amplifiers and other similar applications. In addition, with its low noise figure it can be used to increase the dynamic range and sensitivity of receivers with relatively high noise figures. This can prove to be useful with systems such as the EMSCAN unit.
FREQUENCY RESPONSE: 10 kHz -1000 MHz
POWER OUTPUT: ?1l dBm at less than 1 dB gain compression
INPUT FOR RATED OUTPUT: -18 dBm maximum
GAIN: 30 dB minimum
GAIN FLATNESS: ?1.5 dB
NOISE FIGURE: 3.5 dB typical: 4.5 dB maximum(2 -1000 MHz)
INPUT IMPEDANCE: 50 ohm. VSWR 2.5:1 maximum
OUTPUT IMPEDANCE: 50 ohms, VSWR 2.0:1 maximum
MISMATCH TOLERANCE: 100%, will operate without damage, foldlback or oscillation with any magnitude and phase of source and load impedance.
MODULATION CAPABILITY: will faithfully reproduce AM, FM or pulse modulation appearing on the input signal.
HARMONIC DISTORTION: -20 dBc maximum at +11dBm output
THIDR ORDER INTERCEPT POINT: +21 dBm typuical
PRIMARY POWER: 120/240 VAC, 50/60 Hz
R F CONNECTORS: Type BNC female
WEIGIIT: 24 oz(.6.8 kg)
SIZE: 12.7 x 5.1 x 3.8cm; 5.2 x 1.5 inches
E-mail or call us at 800-582-8378 for more information.