Home
Specials
Contact Us
Product Categories:
Electronic Equipment Rentals
About Kandel Electronics
Sell Your Electronics
Visa | Master Card | Amex

Product Search:  


Meters > RF Power Meters > PSN50 High Accuracy Power Sensor USB by Anritsu Corp

PSN50 High Accuracy Power Sensor USB

 Request a Quote

Product Description & Specs

The High Accuracy Power Meter is designed to provide accurate power measurements from 50 MHz to 6 GHz for many products in the Anritsu catalog. The PSN50 is currently compatible with Site Master<sup>TM</sup>, Cell Master<sup>TM</sup>, Spectrum Master<sup>TM</sup>, BTS Master<sup>TM</sup>, VNA Master<sup>TM</sup>, and the MS271xB Economy Microwave Spectrum Analyzer instruments.

As an overview, the PSN50 sensor provides true RMS measurements from -30 dBm to +20 dBm enabling users to make highly accurate power measurements for both CW and digitally modulated signals such as GSM/EDGE, CDMA/EV-DO,WCDMA/HSDPA, WiMAX, and TD-SCDMA. Accurate power measurements in the field are important for verifying that transmitter outputs are operating at specified levels. For example, service technicians need to verify base station output power because lower output power can quickly translate into large coverage differences that can cause dropped calls.

For the products that support USB, the sensor easily connects to the instrument via a USB A/mini-B cable. These supported USB instruments include the BTS Master, Spectrum Master (MS272xB), VNA Master, and MS271xB Economy Microwave Spectrum Analyzer instruments. An additional benefit of using the USB connection is that a separate DC supply is not needed since the necessary power is supplied by the instrument.

Key Features
Frequency Range: 50 MHz to 6 GHz
Dynamic Range: -30 to +20 dBm
True RMS measurements over a 50 dB Dynamic Range enabling users to make accurate CW and modulated power measurements.
Cal Factor Correction: Improve overall accuracy by correcting for efficiency and mismatch losses
Zero: Remove noise and improve overall accuracy for low level signals (<-20 dBm)
Averaging: Apply averaging to signals with high variation
Max Hold: Displays the maximum value of the non-averaged data
Limit Setup: Turns on limits and setup PASS/FAIL criteria for the measurements. The results are color coded: Green-Pass, Red-Fail
Dual Display: View Power readings linearly and logarithmically without selecting the units
Offset Compensation: Remove any attenuators connected to the sensor
SWR <1.1 (50 MHz to < 2 GHz), <1.2 (2 GHz to 6 GHz)
Sensor Linearity < 3 %
Power Handling (dBm) +33
RF Connector N (m)

E-mail or call us at 800-582-8378 for more information.

Home   About   Contact   Category   Manufacturer   Search   Equipment Rentals   Weekly Specials   Sell Your Electronics

Copyright © 1998-2014, Kandel Electronics, Inc.

Powered by Pliner Solutions, Inc.
Web Development by Pliner Solutions, Inc.